HM43RELAY-11

£49.99

Electric Relay

In stock

The Electric Relay switches the load for various heating, cooling and ventilation sources. It has no exposed buttons making it ideal for commercial applications.
Often installed behind a fused spur so it cannot be tampered with by occupants in the room, normally it is used to control Air Conditioning or Ventilation (HVAC) systems to the schedule setup on the app, or it can also be used to react to occupancy in a zone, switching off AC and HVAC units, saving energy when zones are not being used. For HVAC applications the temperature will be measured by a Room Sensor or Room Thermostat. Alternatively, this can be used to switch any load up to 11A 230V, using its volt- free contact.

As it is mains-powered, the Electric Relay always boosts the signal forthe other devices in the property. This increases the life of the battery powered devices by providing easy lines of communication back to the Smart Master Controller.

The Electric Relay is shipped with a Blanking Plate & One Gang Pattress.

Applications:
• Air Conditioning units – With run/stop connections
• MVHR (Mechanical Ventilation Heat Recovery) units – With run/stop connections
• BEMS (Building Energy Management Systems)
• Heated Towel Rails (Electric Only)
• Kickspace Heaters

Supply Voltage 230V AC - 50hz
Transmission Frequency 868.42 (EU) MHz
Contact Type Micro disconnection
Resistive Load 11A (2400W)
Operating Temperature Range 0°C to 40°C
Relative Humidity 5% to 85%
Enclosure Protection IP21
Regulation FCC part15.249, EN 300 220-1, NCC
RoHS Compliant
Indoor Use Only

This unit comes with a standard 2 years manufacturer warranty.

Please refer to the Warranty Policy.

Standard Delivery Charges Apply. Proceed to checkout to see all available delivery options.

Orders above £350 incl. VAT Qualify for Free UK Delivery.

If you are ordering multiple different items, we will always endeavour to dispatch your goods together. However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.

Delivery charges are calculated at checkout based on your delivery postcode. Please be aware that postcodes in the Scottish Highlands, Norther Ireland, or any other location outside of UK Mainland may incur additional costs.

Please Note: Our products are in stock and are dispatched as soon as possible, with the majority of orders being fulfilled on time in full the next working day. However, due to unprecedented congestion within courier and haulier networks across the UK, a small percentage of deliveries are taking a little longer to arrive with customers.

We use third party couriers to deliver our products safely and securely and always dispatch items on time from our distribution centre. We kindly ask for your understanding in supporting our staff and courier partners in the event that you experience a small delay in receiving your items due to circumstances beyond our control.

View the HM43RELAY-11 Data Sheet here.

  • Signal Boosting
  • Control of 3rd Part HVAC Units
  • HM43RELAY-11 Electric Relay
  • Blanking Plate
  • One Gang Patress
  • Installation Hardware if Required
  • Installation Instructions

Got a question about this product?

Contact Us

Reviews

There are no reviews yet.

Be the first to review “HM43RELAY-11”

Your email address will not be published. Required fields are marked *

error: Content is protected !!